View As PDF
Tuf-Pads™, WSA-100, Steel Pads, Rubber Pads, Frame Cradle,MLS-16

BendPak XPR-10S Clearfloor Two-Post Lift
Versatility – Rugged Dependability

The BendPak XPR-10S two-post car lift features an adjustable top beam to accommodate wide or narrow installations. This unique configurable design allows you to choose the best setting for your specific space or vehicle lifting requirements. The dependable XPR-Series design requires very little service or maintenance for an overall lower cost of ownership. This rugged two-post lift feature dual "direct-drive" low-pressure cylinders, maintenance-free UHMW load bearings, single-piece columns, extra-tall lifting carriages and triple-telescoping arm configuration for increase arm positioning versatility.

Bottom line—when you buy BendPak, you can expect a significant boost in performance and life expectancy. In fact, your BendPak XPR-10A might be the last auto hoist you ever purchase. No one surpasses us in quality and safety. Not now, not ever. When you get a BendPak, you get more than just a fantastic hoist. You get peace of mind. That's the BendPak benefit.

BendPak XPR-10S Features:

Low-profile, dropped-end frame contact pads
Squeeze under even the lowest compact and sport vehicles.

Free adapters

Other lift manufacturers might charge extra for these necessary adapters, but they come standard with every XPR-Series Car Lift. Ideal for use with trucks and vans.
Triple-telescoping front arms and two-stage rear arms
Increases overall arm positioning for lifting a variety of different wheel base vehicles. Overall arm sweep and minimum arm reach are also extended to precisely lift vehicles that have one body construction, OEM recommended pick-up points and wide and / or narrow wheelbase configurations.

Lowered arm tube supports
To minimize the chance of damaging vehicles with low-hanging vehicle doors, we completely redesigned our two-post lift arm tube supports to allow for better clearance.

Automatic arm restraints
Each lift arm is equipped with durable arm restraints that automatically engage each time the lift is raised. When the two-post car lift is lowered, the gear arm restraints automatically disengage to provide easy positioning of the lift arms.

Rubber door protection for peace of mind
Wide, full-face rubber door guards provide added security against vehicle door damage.

Taller lift carriages
Take a close look at BendPak two-post car lift carriages (the lifting assembly that the arms are attached to). Now take a look at the competition. You’ll notice BendPak carriages are 53” tall and considerably taller than most, which minimizes the stress placed on the load bearings and columns.

Maintenance-free load bearings
Rather than using roller bearings that need to be constantly lubricated, every XPR-Series Lift carriage uses high-tech UHMW (ultra-high molecular weight polyethylene) load bearings that never need lubrication and are designed to last the entire life of the car lift.

Single-piece columns
BendPak specifically manufactures their columns using single-piece construction for added strength and less fatigue under heavy load conditions.

Wide or narrow selection
Wide or narrow car lift configurations are available, allowing you to maximize your floor space.

Single-point safety release
The single point safety release and “dead man” style operation controls make every one of our XPR-Series Car & Truck Lifts easy to operate and safe to use.

On the level
BendPak’s dual-synchro equalization system maintains equal lifting and provides operators with a stable, level vehicle working condition.

Industrial-grade hydraulic cylinders
Integrated into every XPR-Series hydraulic cylinder is a one-piece, pilot fitted, machined steel piston that is wrapped with specially designed, pressure loaded U-cup piston seals, backups and wear bands that virtually eliminate any fluid bypass. The welded cylinder body is made from robust steel tubing produced to exceed ASTM specifications. This combination of superb base material and superior processing ensures that the cylinders remain straight, smooth and last a very long time.

High-speed hydraulics
Free-flow, high-pressure 3/8” hydraulic lines, a high-flow pump and integrated AC power-unit increase ascent and descent speed rates for enhanced productivity.

Durable powder-coat finish
All XPR-Series Car Lifts feature a durable powder-coat finish that gives the metal a high-quality, extremely durable finish which can withstand even the harshest environmental or chemical conditions. Unlike other companies that claim to powder coat, we take pride in our meticulous 10-step process. The powder coat finish is applied using an electrostatic spray gun. The powder “sticks” to the surface in a fashion similar to how dust sticks to a television screen. Once the lift parts are powder coated, a conveyor system routes them through a super-sized curing oven where they are left to bake at 400° F for 45 minutes.

Detailed instructions
Included with every BendPak car and truck lift are detailed installation and maintenance instructions, graphic safety decals, maintenance decals, vehicle lifting point guide and a safety instruction placard to train personnel on proper safety procedures and maintenance guidelines.

*NOTE: Not all car lift models sold by Wrenchers Warehouse meet the standards as prescribed by ANSI/ALI ALCTV-(current edition) or ANSI/UL 201. User or Buyer assumes full responsibility for any state, county, federal or international mandated permit, license, code, standard, certification, or any other mandate required related to the installation and/or operation of the car lift. Read full General Disclaimer details.
  • Lift arms shown with optional foot guards
  • 10,000-lb. lifting capacity
  • Expandable top beam accommodates wide or narrow drive-thru configuration
  • Padded overhead safety shutoff bar
  • Exclusive Tru-Metric arm design for more versatile arm positioning
  • Single-point safety release
  • Drop-end arms provide a lower pad height
  • Dual hydraulic direct-drive cylinders
  • Over-sized 53" tall carriage for superior strength and durability
  • Electric / hydraulic power system
  • Large, 17" x 19" A36 steel base plate
  • Self-lubricating dura-glide UHMW polyethylene bearing system
  • Safety locks in each column spaced every 3"
  • Automatic arm restraints
  • Heavy-duty 3/8" aircraft-quality equalizer cables
  • Oversized cable sheave diameter reduces cable fatigue
  • 4-piece adapter set standard
  • Triple-telescoping arm design


How to choose the right car hoist for you

BendPak's Top 10 Car Hoist Buyers Guide



  • Lifting capacity*: 10,000 lbs.
    • *Max capacity / front axle: 5,000 lbs.
    • *Max capacity / rear axle: 5,000 lbs.
  • Overall height: 145"
  • Overall width - NARROW CONFIG: 132"
  • Overall width - WIDE CONFIG: 145" 
  • Width (outside of columns) - NARROW: 126.75"
  • Width (outside of columns) - WIDE: 139.75"
  • Floor to overhead switch*: 141"
  • Inside columns - NARROW: 105.5"
  • Inside columns - WIDE: 118.5" 
  • Front arm min reach: 27.5"
  • Front arm max reach: 51.​50"
  • Rear arm min reach: 34"
  • Rear arm max reach: 54.5"
  • Min pad height: 4.25 to 6.75""
  • Rise: 69"
  • Lift height max (pad only): 73"
  • Lift height max (6" adapter): 75.5 to 77.5"
  • Drive-thru clearance - NARROW: 93"
  • Drive-thru clearance - WIDE: 106" 
  • Motor: 220 VAC / 60 Hz / 1 Ph
  • Time to full rise: 45 sec
  • Max load per arm: 2,500 lbs.

*Not all BendPak car lift models meet the standards as prescribed by AS/NZ 1418.9-(current edition), ANSI/ALI ALCTV-(current edition), ANSI/UL 201. User or Buyer assumes full responsibility for any state, county, federal or international mandated permit, license, code, standard, certification, or any other mandate required related to the installation and/or operation of any BendPak or Ranger product. Read full General Disclaimer details.

The BendPak XPR-10A offers exceptional direct-drive lifting performance.
The BendPak XPR-10A offers exceptional direct-drive lifting performance.
Car lift arms shown with optional foot guards.
BendPak XPR-10 on sale
BendPak tto post lift on sale
Free 8-PC. Truck Adapter Set comes standard with BendPak two-Post XPR-10 car hoist
BendPak lift pads
BendPak XPR-10 top switch bar
BendPak single point safety lock

Featured accessories for the XPR-10S

Call now to order.
Frequently Asked Questions

Quick Specs

Lifting capacity: 10,000 lbs.
Overall height: 145"
Overall width: 132" - 145"
Min pad height: 4"
Rise: 69"
Motor: 220 VAC / 1 Ph
Rise time: 45 sec.
Certified ALI-ETL auto hoist
View Full Specs »

Ask us a question

Business/First Name:
How did you hear about us?
If "Other", please specify:
Product(s) Interest:

About Us

Wrenchers Warehouse has access to all major brands of automotive equipment and tools as well as service equipment, we are offering our customers the best prices on everything from floor jacks to car lifts. Free shipping is offered on most orders and special group discounts are available for multiple orders. We accept most major credit cards.