The heavy-duty BendPak XPR-9DS, Floor Plate Auto Lift is a rugged built lift rich in features designed to enhance productivity and efficiency, while reducing the need for maintenance and service. With lower operating costs and enhanced productivity, the BendPak XPR-9DS is the perfect two-post lifting solution for your shop or garage. Get ready to do more.

The BendPak XPR-9DS is precision, open-top style car lift with a maximum weight capacity of 9,000 lbs. Not only is it capable of raising some of your largest full-sized vans, trucks and commercial vehicles, but also gentle enough to provide service support for compact sports cars of all makes and models. And for added ease-of-use, our dual-synchro equalization system and user-friendly controls are simple to understand and operate.

The “D” in XPR-9D stands for the dual “direct-drive” low-pressure cylinders that minimize leakage and reduce the strain resulting from heavy workloads that would otherwise be placed on the entire hydraulic system. This exclusive BendPak design feature saves you maintenance costs throughout the life of your automobile lift—you aren’t going to find user-focused convenience like this anywhere else.

Every XPR-9DS comes with:

Low-profile, dropped-end frame contact pads
Squeeze under even the lowest compact and sport vehicles.

Free 4 piece 63mm adapters
Other lift manufacturers might charge extra for these necessary adapters, but they come standard with every XPR-Series Car Lift. Ideal for use with trucks and vans.
Triple-telescoping front arms and two-stage rear arms
Increases overall arm positioning for lifting a variety of different wheel base vehicles. Overall arm sweep and minimum arm reach are also extended to precisely lift vehicles that have one body construction, OEM recommended pick-up points and wide and / or narrow wheelbase configurations.

Lowered arm tube supports
To minimize the chance of damaging vehicles with low-hanging vehicle doors, we completely redesigned our two-post lift arm tube supports to allow for better clearance.

Automatic arm restraints
Each lift arm is equipped with durable arm restraints that automatically engage each time the lift is raised. When the two-post car lift is lowered, the gear arm restraints automatically disengage to provide easy positioning of the lift arms.

Taller lift carriages
Take a close look at BendPak two-post car lift carriages (the lifting assembly that the arms are attached to). Now take a look at the competition. You’ll notice BendPak carriages are 53” tall and considerably taller than most, which minimizes the stress placed on the load bearings and columns.

Maintenance-free load bearings
Rather than using roller bearings that need to be constantly lubricated, every XPR-Series Lift carriage uses high-tech UHMW (ultra-high molecular weight polyethylene) load bearings that never need lubrication and are designed to last the entire life of the car lift.

Single-piece columns
BendPak specifically manufactures their columns using single-piece construction for added strength and less fatigue under heavy load conditions.

Wide or narrow selection
Wide or narrow car lift configurations are available, allowing you to maximize your floor space.

Single-point safety release
The single point safety release and “dead man” style operation controls make every one of our XPR-Series Car & Truck Lifts easy to operate and safe to use.

Rubber door protection for peace of mind
Wide, full-face rubber door guards provide added security against vehicle door damage.

On the level
BendPak’s dual-synchro equalization system maintains equal lifting and provides operators with a stable, level vehicle working condition.

Industrial-grade hydraulic cylinders
Integrated into every XPR-Series hydraulic cylinder is a one-piece, pilot fitted, machined steel piston that is wrapped with specially designed, pressure loaded U-cup piston seals, backups and wear bands that virtually eliminate any fluid bypass. The welded cylinder body is made from robust steel tubing produced to exceed ASTM specifications. This combination of superb base material and superior processing ensures that the cylinders remain straight, smooth and last a very long time.

High-speed hydraulics
Free-flow, high-pressure 3/8” hydraulic lines, a high-flow pump and integrated AC power-unit increase ascent and descent speed rates for enhanced productivity.

Durable powder-coat finish
All XPR-Series Car Lifts feature a durable powder-coat finish that gives the metal a high-quality, extremely durable finish which can withstand even the harshest environmental or chemical conditions. Unlike other companies that claim to powder coat, we take pride in our meticulous 10-step process. The powder coat finish is applied using an electrostatic spray gun. The powder “sticks” to the surface in a fashion similar to how dust sticks to a television screen. Once the lift parts are powder coated, a conveyor system routes them through a super-sized curing oven where they are left to bake at 400° F for 45 minutes.

Detailed instructions
Included with every BendPak car and truck lift are detailed installation and maintenance instructions, graphic safety decals, maintenance decals, vehicle lifting point guide and a safety instruction placard to train personnel on proper safety procedures and maintenance guidelines.

*NOTE: Not all car lift models sold by Wrenchers Warehouse meet the standards as prescribed by ANSI/ALI ALCTV-(current edition) or ANSI/UL 201. User or Buyer assumes full responsibility for any state, county, federal or international mandated permit, license, code, standard, certification, or any other mandate required related to the installation and/or operation of the car lift. Read full General Disclaimer details.

• 9,000-lb lifting capacity
• Adjustable width design configures for wide or narrow installation
• Direct-drive lifting system eliminates chains and pulleys
• Dual hydraulic lifting cylinders
• Single-piece columns
• Single point safety release
• Drop-end arms provide a lower pad height
• Triple-telescoping arms provide increased range for lifting point access
• Electric / hydraulic power system
• Large, 20" x 19" steel base plates
• Self-lubricating dura-glide polyethylene bearing system
• Safety locks in each column spaced every 3-inches
• Automatic arm restraints
• Heavy-duty dual 3/8" equalizer cables with oversize cable sheaves
• 8-piece truck and van adapter set comes standard
  
  

---

• Lifting capacity*: 9,000 lbs. 
  • *Max capacity / front axle: 4,500 lbs.
  • *Max capacity / rear axle: 4,500 lbs.
• Overall height: 145" / 3,683 mm
• Overall width (NARROW CONFIG): 132"
  Overall width (WIDE CONFIG): 145"
• Width outside of columns (NARROW CONFIG): 126-3/4"
  Width outside of columns (WIDE CONFIG): 139-3/4
• Floor pan height: 1-3/4"
• Inside columns (NARROW CONFIG): 102"
• Inside columns (WIDE CONFIG): 118"
• Front arm min reach: 27-1/2"
• Front arm max reach: 51-1/2"
• Rear arm min reach: 34"
• Rear arm max reach: 54-1/2"
• Min pad height: 4"
• Rise: 69"
• Lift height max (pad only): 73"
• Lift height max (6" adapter): 79"
• Drive-thru clearance (NARROW): 93"
• Drive-thru clearance (WIDE): 106"
• Motor: 220 VAC / 60 Hz / 1 Ph
• Time to full rise: 45 sec
• Max load per arm: 2,250 lbs.

*NOTE: Not all car lift models sold by Wrenchers Warehouse meet the standards as prescribed by ANSI/ALI ALCTV-(current edition) or ANSI/UL 201. User or Buyer assumes full responsibility for any state, county, federal or international mandated permit, license, code, standard, certification, or any other mandate required related to the installation and/or operation of the car lift. Read full General Disclaimer details.