View As PDF
XPR-15CL
Tuf-Pads™,WSA-100,Steel Pads,Rubber Pads,Frame Cradle,MLS-16
Name:
Model:
Price:
The BendPak XPR‐15C 2‐post lift is durable, a safe and reliable car lift that is well suited for virtually every lifting application. The powerful XPR‐15C is built with a robust menu of features to increase efficiency and productivity without overwhelming you with serviceable parts and necessary maintenance. If you're looking to make more money in less time than ever before, you'll find that our 15K and 18K series models are the perfect addition to your shop—especially when you work with heavier vehicles that require larger lifting capacities.

These super‐duty BendPak two-post models are rugged enough to handle your largest full‐sized trucks and commercial vehicles, yet still provide specific capability for standard passenger cars and light trucks, both foreign and domestic. If your business caters to super‐tall vehicles, be sure to check out the XPR‐15C‐192 or XPR‐18C‐192; models that feature column extensions that provide two‐feet of added overhead clearance.


Every XPR-15C comes with:

Low-profile, dropped-end frame contact padsBendPak-XPR_Series_Car-Lift-Features.jpg
Squeeze under even the lowest compact and sport vehicles.

Free truck and van adapters

Other lift manufacturers might charge extra for these necessary adapters, but they come standard with every XPR-Series Car Lift. Ideal for use with trucks and vans.

Frame cradle pads come standard
Reduce risk and increase your peace-of-mind when lifting full-sized trucks. Standard equipped Frame Cradle Pads cradle truck frames and the rubber contact pad holds onto the frame and keeps it there, without harming vehicle undercoating.

Triple-telescoping front and rear arms

Increases overall arm positioning for lifting a variety of different wheel base vehicles. Overall arm sweep and minimum arm reach are also extended to precisely lift vehicles that have one body construction, OEM recommended pick-up points and wide and / or narrow wheelbase configurations.

Lowered arm tube supports
To minimize the chance of damaging vehicles with low-hanging vehicle doors, we completely redesigned our two-post lift arm tube supports to allow for better clearance.

Automatic arm restraints
Each lift arm is equipped with durable arm restraints that automatically engage each time the lift is raised. When the two-post car lift is lowered, the gear arm restraints automatically disengage to provide easy positioning of the lift arms.

Taller lift carriages
Take a close look at BendPak two-post car lift carriages (the lifting assembly that the arms are attached to). Now take a look at the competition. You’ll notice BendPak carriages are 53” tall and considerably taller than most, which minimizes the stress placed on the load bearings and columns.

Maintenance-free load bearings
Rather than using roller bearings that need to be constantly lubricated, every XPR-Series Lift carriage uses high-tech UHMW (ultra-high molecular weight polyethylene) load bearings that never need lubrication and are designed to last the entire life of the car lift.

Single-piece columns
BendPak specifically manufactures their columns using single-piece construction for added strength and less fatigue under heavy load conditions.

Wide or narrow selection
Wide or narrow car lift configurations are available, allowing you to maximize your floor space.

Single-point safety release
The single point safety release and “dead man” style operation controls make every one of our XPR-Series Car & Truck Lifts easy to operate and safe to use.

Rubber door protection for peace of mind
Wide, full-face rubber door guards provide added security against vehicle door damage.

On the level
BendPak’s dual-synchro equalization system maintains equal lifting and provides operators with a stable, level vehicle working condition.

Industrial-grade hydraulic cylinders
Integrated into every XPR-Series hydraulic cylinder is a one-piece, pilot fitted, machined steel piston that is wrapped with specially designed, pressure loaded U-cup piston seals, backups and wear bands that virtually eliminate any fluid bypass. The welded cylinder body is made from robust steel tubing produced to exceed ASTM specifications. This combination of superb base material and superior processing ensures that the cylinders remain straight, smooth and last a very long time.

High-speed hydraulics
Free-flow, high-pressure 3/8” hydraulic lines, a high-flow pump and integrated AC power-unit increase ascent and descent speed rates for enhanced productivity.

Durable powder-coat finish
All XPR-Series Car Lifts feature a durable powder-coat finish that gives the metal a high-quality, extremely durable finish which can withstand even the harshest environmental or chemical conditions. Unlike other companies that claim to powder coat, we take pride in our meticulous 10-step process. The powder coat finish is applied using an electrostatic spray gun. The powder “sticks” to the surface in a fashion similar to how dust sticks to a television screen. Once the lift parts are powder coated, a conveyor system routes them through a super-sized curing oven where they are left to bake at 400° F for 45 minutes.

Detailed instructions
Included with every BendPak car and truck lift are detailed installation and maintenance instructions, graphic safety decals, maintenance decals, vehicle lifting point guide and a safety instruction placard to train personnel on proper safety procedures and maintenance guidelines.

*NOTE: Not all car lift models sold by Wrenchers Warehouse meet the standards as prescribed by ANSI/ALI ALCTV-(current edition) or ANSI/UL 201. User or Buyer assumes full responsibility for any state, county, federal or international mandated permit, license, code, standard, certification, or any other mandate required related to the installation and/or operation of the car lift. Read full General Disclaimer details.
  • 15,000-lb. lifting capacity
  • Padded overhead safety shutoff bar
  • Extended height top-beam provides greater overhead clearance
  • Single-point safety release
  • Dual direct-drive hydraulic cylinders
  • Dual-synchro equalization system for equal lifting
  • Oversized 53" tall carriage for superior strength and durability
  • Electric / hydraulic power system
  • Oversized A36 steel base plates
  • Self-lubricating dura-glide UHMW polyethylene bearing system
  • Safety locks in each column spaced every 3"
  • Automatic arm restraints
  • Heavy-duty 1/2" aircraft-quality equalizer cables
  • Oversized cable sheave diameter reduces cable fatigue
  • Durable, rubber lift pads with stackable adapters
  • Multi-piece adapter set includes four 6" stackable adapters, four 3" stackable adapters, four polyurethane contact pads and four frame cradle pads. Ideal for trucks and vans with running boards or auxiliary fuel tanks.
  • Convenient storage is included for truck and van adapters
  • Versatile drop-in contact pads with stackable adapters


  • /Direct-Drive-logo-button.jpg

    Best Warranty Car Hoists - BendPak

    How to choose the right car hoist for you

    BendPak's Top 10 Car Hoist Buyers Guide

  • Lifting capacity*: 15,000 lbs. / 6,804 kg
    • *Max capacity / front axle: 7,500 lbs. / 3,402 kg
    • *Max capacity / rear axle: 7,500 lbs. / 3,402 kg
  • Overall height: 170" / 4,318 mm
  • Overall width (outside of base plate): 155" / 3,937 mm
  • Width (outside of columns): 144" / 3,658 mm
  • Floor to overhead switch: 165" / 4,191 mm
  • Inside columns: 120" / 3,048 mm
  • Front arm min reach: 39" / 991 mm
  • Front arm max reach: 60" / 1,524 mm
  • Rear arm min reach: 39" / 991 mm
  • Rear arm max reach: 60" / 1,524 mm
  • Min pad height: 5" / 127 mm
  • Rise: 69" / 1,753 mm
  • Lift height max (pad only): 74" / 1,880 mm
  • Lift height max (6" adapter): 80" / 2,032 mm
  • Drive-thru clearance: 106" / 2,692 mm
  • Motor: 220 VAC / 60 Hz / 1 Ph
  • Time to full rise: 45 sec
  • Max load per arm: 3,750 lbs. / 1,701 kg
  • Shipping weight: 2,986 lbs. / 1,357 kg
  • Shipping dimensions: 172" x 29" x 54" / 4,369 mm x 737 mm x 1,372 mm

*NOTE: Not all car lift models sold by Wrenchers Warehouse meet the standards as prescribed by ANSI/ALI ALCTV-(current edition) or ANSI/UL 201. User or Buyer assumes full responsibility for any state, county, federal or international mandated permit, license, code, standard, certification, or any other mandate required related to the installation and/or operation of the car lift. Read full General Disclaimer details.

BendPak XPR-15C clear floor two post hoist
BendPak XPR-15C clear floor two post hoist
XPR-15C carriage assembly
BendPak Frame Cradle Pads
Cable Sheaves
BendPak Lifts Sale
XPR-15C height adapter
BendPak Lift Safety
2 Post Car Hoist Adapter Set

Featured accessories for the XPR-15CL


Call now to order.
1-800-587-0663
Frequently Asked Questions


Quick Specs

Lifting capacity: 15,000 lbs.
Overall height: 170"
Overall width: 155"
Min pad height: 5"
Rise: 69"
Motor: 220 VAC / 1 Ph
Rise time: 45 sec.
Shipping weight: 2,986 lbs.
Certified ALI-ETL auto lift
View Full Specs »

Ask us a question

Business/First Name:
Email:
Phone:
How did you hear about us?
If "Other", please specify:
Product(s) Interest:
Comments/Questions:

About Us

Wrenchers Warehouse has access to all major brands of automotive equipment and tools as well as service equipment, we are offering our customers the best prices on everything from floor jacks to car lifts. Free shipping is offered on most orders and special group discounts are available for multiple orders. Be sure to ask about our "EASY-PAY" lease plan that provides convenient monthly payments. We accept most major credit cards.

Contact Us

Toll-Free: 1-800-587-0663

Local: 1-800-587-0663

Contact us or Fill out Form