Install your new Moisture Minder® like a pro. With this kit, you'll be up and running your dryer, more efficient compressor in no time. Allows drain valve to be mounted higher than the mandated 18" height requirement.
Valve can be mounted to dryer side panels or to motor mounting plates with the bulkhead feature. Just drill a 3/4" diameter hole and secure with jam nut and e-ring. And with the optional mounting bracket, you can also use the installation kit to mount the Moisture Minder® on to standard piping.
Moisture Minder® sold separately.
- Kit includes everything you need to mount the Moisture Minder® quickly and easily
- Mounts Moisture Minder® to dryer side panels
- Mounts Moisture Minder® to motor mounting plates
- Mounts Moisture Minder® to standard piping
- Nycoil polyethylene tubing: 12-1/2' / 3,810 mm
- Rated tubing capacity: 167 psi / 11 bar @ 68° F / 20° C
- Mounting kit includes:
- U-bolt assembly
Featured accessories for the Moisture Minder Kit
|Tubing:||12-1/2' / 3,810 mm|
|Tubing capacity:||167 psi|