BendPak's HDS-Truck Series four-post hoists are a whole new breed of rugged. They’re newly engineered heavy-duty truck hoists that make light work out of heavy lifting. They work better, are built to last, and feature upgrades that increase safety, durability and productivity. The HDS-18, HDS-27, and extended length HDS-27X four-post models provide a generous 18,000 and 27,000-lb. lifting capacity and feature extra-wide runways to accommodate a wide variety of vehicles configurations.

All HDS-27 standard length truck hoists feature:

• Supersized 12” diameter cable sheaves within the runway and cross tubes combined with massive 4” diameter sheave axles dramatically improve cable wear and critical component lifespan meaning you’ll increase safety and spend less money in service related expenses down the road.


• Extended capacity lift features 357" length runways.

• BendPak's HDS-Truck Series hoists feature four stainless-steel lifting cables that provide a great balance between abrasion resistance and fatigue.


• Grease nipples are located on every sheave and sheave axle to make lubrication maintenance a breeze.
   
• Each HDS-Truck Series four-post hoist is equipped with a single hydraulic cylinder hidden away under the runway for maximum performance and reliability and minimum exposure to elements. The hydraulic cylinder features high-durometer rod seals, pressure loaded U-cup piston seals, backups and wear bands that virtually eliminate any fluid bypass. The welded cylinder body is made from high strength steel tubing produced to exceed ASTM specifications. This combination of superb base material and superior processing ensures straight, smooth, cylinders that will provide years and years of dependable trouble-free service.


• An integrated hydraulic flow restrictor provides a controlled descent in the unlikely event of an unexpected hose rupture.
   
• A durable powder coat finish can withstand harsh environments and chemical spills and will provide years of protection.


• Spring-loaded safety locks automatically engage continuously during rise and adjustable safety ladders allow for precise runway leveling even when installed on sloped floors.


• A simple push-button pneumatic lock release makes lowering operations simple and fast. Aircraft-quality stainless steel and aluminum pneumatic cylinders will provide years of trouble-free service.


• A secondary lock system is on constant guard and acts as a slack-cable device in the unlikely event of an unexpected cable failure.


• Lifting cables, airlines, safety latches and sheaves are all fully enclosed within hoist structure.


• Features multiple adjustable height locking positions for variable-height parking and infinite leveling.


• A maintenance-free electric hydraulic power system assures ultimate dependability.


• All operator controls are conveniently located within easy reach.


• 12" x 12" base plates provide a solid foundation.


• Non-skid runways provides maximum grip, even when the runway surface is wet or oily.

• Optional rolling jacks make a great addition to increase service capacity. Rolling jacks are used to raise the front or rear portion of a vehicle off the runways allowing operators to perform efficient wheel and break service. A pair of jacks allows the entire vehicle to elevated. Each jack has telescoping arms and frame contact pads that can be extended over the runways and positioned under vehicle lifting points. Each jack features three safety-lock positions and stackable truck and van adapters for increased lifting height and better access to frame contact points on high ground-clearance vehicles. The jacks come equipped with a commercial grade air-hydraulic pump.

• 27,000-lb. lifting capacity
• Supersized 12" diameter cable sheaves
• Stainless steal lifting cables
• Grease nipples
• Single hydraulic under-runway cylinder
• Integrated flow restrictor
• Durable powder coat
• Spring-loaded safety locks
• Second lock system on constant guard
• Fully enclosed lifting cables
• Multiple adjustable height locking positions
• Maintenance-free electric hydraulic power system
• Conveniently positioned operator controls
• 12" x 12" base plates
• Non-skid runways
• Optional rolling jacks
  
  

• Lifting capacity*: 27,000 lbs. / 12,247 kg
  • *Max capacity / front axle: 13,500 lbs. / 6,124 kg
  • *Max capacity / rear axle: 13,500 lbs. / 6,124 kg
• Overall width: 154" / 3,912 mm
• Outside length: 317" / 8,052 mm
• Overall length: 357" / 9,068 mm
• Height of columns: 93" / 2,362 mm
• Runway min height: 8-1/2" / 216 mm
• Max rise: 60" / 1,524 mm
• Max lifting height: 68-1/2" / 1,740 mm
• Width between posts: 134" / 3,404 mm
• Runway width: 22" / 559 mm
• Width between runways: 38" – 56" / 965 mm – 1,422 mm
• Runway centerline: 60" - 78" / 1,524 mm to 1,981 mm
• Outside edge of runways: 82" - 100" / 2,083 mm - 2,540 mm
• Drive-thru clearance: 109" / 2,769 mm
• Length of runways: 323" / 8,204 mm
• Min wheelbase @ rated capacity: 230" / 5,842 mm
• Min wheelbase @ 75% capacity: 195" / 4,953 mm
• Min wheelbase @ 50% capacity: 165" / 4,191 mm
• Min wheelbase @ 25% capacity: 130" / 3,302 mm
• Locking positions: 9
• Lock spacing: every 6" / 152 mm
• Lifting time: 75 sec
• Motor: 220 VAC / 60 Hz / 1 Ph
• Shipping weight: 5,581 lbs. / 2,537 kg
• Shipping dimensions: 270" x 23" x 36" / 6,858 mm x 584 mm x 914 mm

Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

*Not all BendPak car hoist models meet the standards as prescribed by AS/NZ 1418.9-(current edition), ANSI/ALI ALCTV-(current edition), ANSI/UL 201. User or Buyer assumes full responsibility for any state, county, federal or international mandated permit, license, code, standard, certification, or any other mandate required related to the installation and/or operation of any BendPak or Ranger product. Read full General Disclaimer details. For more information contact Wrenchers Warehouse via contact@wrencherswarehouse.com