View As PDF
Email This Page
RS-500D Professional Spray Wash Cabinet With Skimmer / Deluxe / Dual-Heaters / Low Water Shutoff
RS-750D Truck Spray Wash Cabinet With Skimmer / Deluxe / Dual-Heaters / Low Water Shutoff
Need more room, with an increased cabinet size and larger solution tank the RS-500 is versatile and just what you need. Using an 8 sided full-opening door, enhances your access to the 30" turntable for easy loading. Easy to understand operating controls, replaceable brass nozzles, a gasket-free door and a high-capacity 70-gpm pump are Ranger's promise to great performance and more productivity without giving up quality. The Ranger RS-500 is built to last. Ranger constructed the cabinet and door with heavy-duty 12-gauge steel and coated it with a two-step industrial primer and powder coat finish. Outstanding performance, exceptional durability and better operator convenience should help you make the Ranger RS-500 your final choice just like other professionals worldwide.
Parts and accessories:
|
Movable filter basket Each Ranger spray component washer cabinet includes a tough filter trap to secure big particles greater than 1/8". The basket is removable for access to the solution tank and easy maintenance.
|
|
Multi-directional sprayers Spray jets are located below, above and on the sides to wash away touch grime.
|
| Steel oil skimming system
Ranger parts washers include a stainless-steel oil skimmer it amazingly separates oil and grime from the water which increases the longevity of the detergent/ solution cleanser. Contaminants and oils are moved by downspout into holding containers.
|
|
Fast-release door latch / gasket-free door Quick-release door latches are built-in for technician ease. The
gasket-free interlocking door helps keeps the cleanser material in the tank instead of on your garage floor. |
|
Brass nozzles Ranger parts washers include replaceable spray nozzles made of brass instead of pipe-tree and drilled holes. With a sharply articulated spray grid giving users high-quality cleaning experience and great overall performance that is free from corrosion.
|
|
Durable turntable Friction-drive, that's the secret behind the parts washer turn table. It reduces the risk of component jamming inside the cabinet thus eliminating potential motor damage. |
|
Industrial casters and convenient tank drain Rubber swivel casters, heavy-duty, provide easy of mobility. All Ranger washers include built-in pipe drains which eliminate sludge from the floor of the parts washer tank. |
|
Safety switch and timer dial For safety the door switch turns off the washing cycle whenever the door is opened, and a 60-minute timer allows you to manually set different wash cycle times. |
|
Removable tree rack and components basket |
|
Extra accessories come standard All Ranger parts spray washers come with 25 pounds of free soap, a removable parts rack and a small parts basket. |
|
Commercial-grade pump / motor combination Every Ranger parts spray washer features American made centrifugal pumps engineered for parts washing applications. Protected with a cover to avoid contamination, the motor and pump are located at the rear of the cabinet. |
|
Hot cleaning A nickel based, alloy-sheathed, and a heater
element |
|
Thermostat Adjustable set point thermostat features a heating range of 135 to 175 Degrees Fahrenheit. |
|
Double-pole circuit breaker The 20/30 amp Quadplex Double-Pole Type BR Circuit Breaker by Eaton Cutler-Hammer features a two-pole 20 amp breaker for the heater and another independent two-pole 30 amp breaker for the motor and pump combination. |
|
Aluma-Klean soap removes oil, stains and grease with ease Ranger’s Aluma-Klean spray-wash detergent is not a solvent. It is a mild parts cleaning soap used to clean stainless steel, aluminum and other delicate parts without fading the surface. Aluma-Klean is a non-foaming, water-soluble, low pH, mild-alkali, powdered detergent specially formulated for high pressure and heated parts washing systems. Removes oil, carbon, grease, baked on stains, even protein and some paints. |
- Large drain pipe
- Heavy-duty rubber casters
- Friction-drive turntable system
- Gasket-free door
- Small parts basket
- Stainless steel handles
- Removable parts tree
- Free bucket of soap included
- Heavy-Duty steel construction
- Removable tank screen
- Stainless oil skimmer
- Powder coat finish
- Replaceable Brass nozzles
- Full opening 8 sided door
- Load capacity: 500 lbs. / 227 kg
- Cycle Timer: 0 - 60 minutes
- Brass Nozzles: 18
- Steel construction: 12 Gauge / .109 thickness
- Pump output: 75 psi @ 70 gpm
- Motor: 1 Hp / 220 VAC / 60 Hz / 1 Ph
- Electric heater: 6 kW
- Water Temperature: 0° - 190° F
- Weight (shipping): 750 lbs. / 336 kg
- Shipping dimensions: 36" x 44" x 68" / 914 mm x 1,118 mm x 1,727 mm
- Overall height: 66" / 1,676 mm
- Inside height: 43" / 1,092 mm
- Inside width: 32" / 813 mm
- Turntable diameter: 30" / 762 mm
- Tank capacity: 50 gallons
- Recommended floor space: 44" x 43" / 1,118 mm x 1,092 mm
Featured accessories for the COMING SOON "D" Models
Frequently Asked QuestionsQuick Specs
| Load capacity: | 500 lbs. |
| Height: | 66" |
| Inside height: | 43" |
| Inside width: | 32" |
| Turntable diameter: | 30" |
| Tank capacity: | 50 gal. |
| Cycle Timer: | 0 - 60 min. |
| Shipping weight: | 750 lbs. |
