Includes Turnplates and Slip Plates
BendPak's HD-Series alignment lifts are engineered to meet the strenuous demands of even your toughest professional lifting jobs. Designed into every HD-Series lift is a laundry list of key features as long as your arm to ensure that BendPak is the absolute best you can buy.
The HDS-14LSX is the sturdy beast you want as the backbone of your shop; especially if you specialize in servicing larger, low ground clearance vehicles. Our alignment system features front turn plates and rear slip plates built right into the runways. The wheels always respond to your adjustments with no resistance or hassle.
We call it “free floating.” You’ll call it unbelievably easy.
It’s just another way that you can bet on BendPak lifts for increased durability, safety and productivity. Spend less time worrying about what you’re working under and more time doing what you love. Our commercial-grade lifts are second to none and recognized the world-over as benchmarks of dependability and quality.
The HDS-14LSXE features aircraft-quality stainless steel and aluminum pneumatic cylinders that release all four locks simultaneously with the simple push of a button. The spring-loaded safety locks automatically engage continuously when raising the lift. For added safety, a second lock system acts as an automatic slack-cable device, automatically engaging in the event of an unexpected cable failure. Lifting cables, airlines, safety latches and sheaves are all fully enclosed within the lift structure.
Love the super-long lifting and aligning power of the HDS-14LSXE, but need something a little different? Check out the extended HDS-14LSX.
*Not all BendPak car hoist models meet the standards as prescribed by AS/NZ 1418.9-(current edition), ANSI/ALI ALCTV-(current edition), ANSI/UL 201. User or Buyer assumes full responsibility for any state, county, federal or international mandated permit, license, code, standard, certification, or any other mandate required related to the installation and/or operation of any BendPak or Ranger product. Read full General Disclaimer details. For more information contact Wrenchers Warehouse at email@example.com
- 14,000-lb. lifting capacity
- Two runway lengths to choose
- Heavy‐duty turn plates and integrated rear slip‐plates included
- Multi‐position turn plate pockets
- Automatic leveling system
- Runways include rail‐kit for optional accessories
- Electric/hydraulic power system
- Single hydraulic cylinder mounted underneath runway
- Internal “Anti-Sway” slider blocks in each column
- Features oversize sheaves and heavy‐duty ½” aircraft cable
- Rugged 1‐3/8” roller axles and oversize self‐lubricating cable sheaves
- Multi‐position safety locks in each column with push‐button safety release
- Runways adjust for different tread widths and feature non‐skid surface
- Optional 7,000 pound capacity bridge jacks available (Model RJ‐7)
- Lifting capacity: 14,000 lbs. / 6,350 kg
- Front axle max capacity: 7,000 lbs. / 3,175 kg
- Rear axle min capacity: 7,000 lbs. / 3,175 kg
- Overall width: 130" / 3,301 mm
- Outside length: 243" / 6,170 mm
- Overall length: 271" / 6,893 mm
- Height of columns: 93" / 2,362 mm
- Runway min height: 7-5/8" / 192 mm
- Max rise: 70" / 1,778 mm
- Max lifting height: 77-5/8" / 1,970 mm
- Width between posts: 120" / 3,046 mm
- Runway width: 20" / 508 mm
- Width between runways: 37-1/2" – 51" / 952 mm – 1,295 mm
- Length of runways: 229" / 5,816 mm
- Min 4-wheel alignment: 89" / 2,261 mm
- Max 4-wheel alignment: 156" / 3,962 mm
- Max 2-wheel alignment: 212" / 5,385 mm
- Min wheelbase @ rated capacity: 165" / 4,191 mm
- Min wheelbase @ 75% capacity: 140" / 3,556 mm
- Min wheelbase @ 50% capacity: 115" / 2,921 mm
- Min wheelbase @ 25% capacity: 95" / 2,413 mm
- Locking positions: 13
- Lock spacing: every 4" / 102 mm
- Lifting time: 60 sec
- Motor: 220 VAC / 60 Hz / 1 Ph
- Shipping weight: 3,455 lbs. / 1,567 kg
- Shipping dimensions: 204" x 22" x 40" / 5,182 mm x 559 mm x 1,016 mm
Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.
*Not all BendPak car hoist models meet the standards as prescribed by AS/NZ 1418.9-(current edition), ANSI/ALI ALCTV-(current edition), ANSI/UL 201. User or Buyer assumes full responsibility for any state, county, federal or international mandated permit, license, code, standard, certification, or any other mandate required related to the installation and/or operation of any BendPak or Ranger product. Read full General Disclaimer details. For more information contact BendPak via: firstname.lastname@example.org
Featured accessories for the HDS-14LSXE
|Lifting capacity:||14,000 lbs.|
|Min 4-wheel alignment:||89"|
|Max 4-wheel alignment:||156"|
|Max 2-wheel alignment:||212"|
|Shipping weight:||3,455 lbs.|
View Full Specs »