The HDS-40 is a super-duty 4-post truck lift designed for truck fleet service operations. The HDS-40 has a 40,000 pound lifting capacity and is one of the largest heavy-duty four post hoists in its class. BendPak’s 4 post lifts are specifically designed for commercial use.
All HDS-40 standard length truck hoists feature:
*NOTE: Not all car lift models sold by Wrenchers Warehouse meet the standards as prescribed by ANSI/ALI ALCTV-(current edition) or ANSI/UL 201. User or Buyer assumes full responsibility for any state, county, federal or international mandated permit, license, code, standard, certification, or any other mandate required related to the installation and/or operation of the car lift. Read full General Disclaimer details.
- 40,000-lb. lifting capacity
- Supersized 12" diameter cable sheaves
- Stainless steal lifting cables
- Grease nipples
- Single hydraulic under-runway cylinder
- Integrated flow restrictor
- Durable powder coat
- Spring-loaded safety locks
- Second lock system on constant guard
- Fully enclosed lifting cables
- Multiple adjustable height locking positions
- Maintenance-free electric hydraulic power system
- Conveniently positioned operator controls
- 12" x 12" base plates
- Non-skid runways
- Optional rolling jacks
- Lifting capacity*: 40,000 lbs. / 18,144 kg
- *Max capacity / front axle: 20,000 lbs. / 9,072 kg
- *Max capacity / rear axle: 20,000 lbs. / 9,072 kg
- Overall width: 154" / 3,912 mm
- Outside length: 257" / 6,528 mm
- Overall length: 297" / 7,544 mm
- Height of columns: 93" / 2,362 mm
- Runway min height: 8-1/2" / 216 mm
- Max rise: 60" / 1,524 mm
- Max lifting height: 68-1/2" / 1,740 mm
- Width between posts: 134" / 3,404 mm
- Runway width: 28" / 711 mm
- Width between runways: 36" – 47" / 914 mm – 1,194 mm
- Runway centerline: 64" - 75" / 1,625 mm to 1,905 mm
- Outside edge of runways: 92" - 103" / 2,367 mm - 2,616 mm
- Drive-thru clearance: 109" / 2,769 mm
- Length of runways: 263" / 6,680 mm
- Min wheelbase @ rated capacity: 185" / 4,699 mm
- Min wheelbase @ 75% capacity: 160" / 4,064 mm
- Min wheelbase @ 50% capacity: 135" / 3,429 mm
- Min wheelbase @ 25% capacity: 110" / 2,794 mm
- Locking positions: 9
- Lock spacing: every 6" / 152 mm
- Lifting time: 75 sec
- Motor: 220 VAC / 60 Hz / 1 Ph
Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.
*NOTE: Not all car lift models sold by Wrenchers Warehouse meet the standards as prescribed by ANSI/ALI ALCTV-(current edition) or ANSI/UL 201. User or Buyer assumes full responsibility for any state, county, federal or international mandated permit, license, code, standard, certification, or any other mandate required related to the installation and/or operation of the car lift. Read full General Disclaimer details.
Featured accessories for the HDS-40
Quick Specs
Lifting capacity: | 40,000 lbs. |
Overall width: | 154" |
Overall length: | 297" |
Height of columns: | 93" |
Max rise: | 60" |
Length of runways: | 263" |
Motor: | 220 VAC / 1 Ph |